KROHNE, Inc. will showcase a wide range of its industry-leading water and wastewater products, including its line of analytical sensors at WEFTEC 2016, Booth 3807. The 89th Annual Water Environment Federation Technical Exhibition and Conference will be held September 26th – 28th at the Ernest N. Morial Convention Center, New Orleans, Louisiana.
On display will be the TIDALFLUX 2300, KROHNE’s unique flow meter for partially filled pipes. The meter can measure flows in pipes between 10 and 100 percent full and its non-contact sensor is not affected by oils and fats floating on the surface. In addition, TIDALFLUX has a broad diameter range to fit pipes up to DN1600 or 64 inches, and has high chemical and abrasion resistance to provide exceptional durability.
KROHNE will also highlight SMARTPAT, a family of 2-wire loop powered analytical sensors with integrated transmitter technology for direct connection of the sensors to process control systems.
All sensors are digital and can be calibrated or recalibrated offline in a laboratory under controlled conditions. For offline calibration, the sensor can be connected directly to a PC running the same FDT/DTM frame applications (i.e. PACTware) as applied in common asset management systems, using an USB interface cable for bi-directional HART 7 communication and power supply. This is a significant improvement over other analog analytical sensors that have to be calibrated on site together with the transmitter, even if installed at remote or difficult-to-reach measuring points, which can also cause sensor calibration to trigger false values in the process control system.
KROHNE’s full product line for use in the water and wastewater industry will also be featured at the booth, including the OPTIFLEX 2200 TDR, OPTIWAVE 5200 radar and OPTISOUND VU30 level meters; the ENVIROMAG and WATERFLUX mags; the unique OPTISONIC 6300 P portable clamp-on and OPTISONIC 7300 biogas ultrasonic flow meters; as well as a variety of temperarture and pressure offerings. KROHNE representatives will be available at the booth to discuss technology, products and applications in detail.